Glass Windows and Covers


Glass Windows and Covers Substrate

Substrate

Glass windows and covers for optical sensors, microelectronics and other applications often require materials or specifications not available in sheet glass format. Through Water Jetting, Coring, Wire Sawing, Lapping and Polishing, Coresix has the tools, processes and experience to transform nearly any glass material to a substrate from which we can efficiently fabricate small format glass components to exacting specifications.

Learn More >>

Cutting Glass Windows

Cutting

Whether using standard sheet glass, fused silica or optical glass, once the substrate has been established, we use a precision mechanical scribe process to size the individual parts. In some cases, for extremely small parts, it may be appropriate to scribe and ship the substrate on a Tape Ring from which the individual parts can later be “peeled” and applied to the application.

Learn More >>

Glass Window Edging

Edging

Though CNC Edging is available within certain size limits, a more cost effective approach for small parts is to Hand Seam edges and corners on a diamond grinding wheel. This is a very consistent process which eliminated the sharp edge and corners making the parts safe to handle and promoting cleanliness through reduced particle migration.

Learn More >>

Ultrasonic Glass Window Cleaning

Cleaning

Achieving a high level of cleanliness begins with the fabrication process where parts are cut in a clean environment, cutting fluids are not used, and proper handling protocols are employed. Part specific carriers are designed to enable final cleaning through one of two very effective Ultrasonic Cleaning lines. Combined with Class 100 Cleanroom Inspection and Packaging, we can meet the cleanliness needs of the most demanding applications.

Learn More >>

Glass Window Inspection

Inspection

Within our Class 100 Optical Clean Room, our most advanced inspection practices can be applied to the smallest of parts. While metrology (Thickness, Parallelism, Flatness, Roughness, etc.) is often performed at the substrate level, each part is inspected individually to assure surface quality and cleanliness requirements are met 100% of the time.

Learn More >>

Glass Wafer Packaging

Packaging

Since glass windows are custom sized to the application, there is rarely a suitable non-contact container or tray readily available for packaging. For programs with supporting volume, a Custom Vacuum Formed Tray is the most effective option. Where volumes do not justify, Coresix can often apply a creative solution for unique packaging needs. If the application allows, clean room Envelopes or Tissue Wrap are often viable and low cost alternatives.

Learn More >>

Dimensional Specifications

Most dimensions are limits under optimal conditions and are subject evaluation upon inquiry.

Attribute Minimum Maximum Tolerance
Thickness 50µm 10mm +/- 2µm
Dimensions (Scribed Edge) 5.0mm x 5.0mm n/a +/- 50µm
Dimensions (Hand Seam) 12mm x 12mm n/a +/- 50µm
Dimensions (CNC Edge) 35mm x 35mm n/a +/- 25µm
Dimensions (Scribed Edge) 6.0mm n/a /- 100µm
Diameter (CNC Edge) 25.0mm 450.0mm +/- 25µm
Thickness Variation (TTV) <1µm n/a n/a
Flatness 1/10 Wave/Inch n/a n/a
Surface Roughness (RMS) <2Å n/a n/a
Scratch and Dig 5/2 n/a n/a
Particle Size <5µm n/a n/a
Bow/Warp <10µm n/a n/a

Actual specifications will be dependent upon material, format and other factors. We will be glad to evaluate your requirements and advise the best possible process available.

Capabilities


Glass Window Dimentional Capabilities

Dimensional

Whether from stock glass sheets or custom produced substrate, small window and cover glass components are cut to size using a mechanical scribe process. The dimensional tolerances of this process, depending upon part size and material thickness, can be held to as low as +/-25 microns. If a fully ground edge, custom shape or other features are needed, CNC edging can be used to hold tolerance and relative positioning to within 25 microns. Hand seaming, the most common and economical method of edging small format glass, will not change the dimensional tolerance of the part. These edges and corner crops can be applied to customer requirements with repeatability within 50 microns.

Learn More >>

Glass Windows Thickness

Thickness

If standard sheet glass thickness doesn’t meet your needs, or components are to be made from a bulk glass format, an appropriate substrate can be prepared to tolerances below 5 microns with thickness variation within each part to below 1 micron. We will evaluate your material and thickness requirements to propose the most effective process at the lowest price point.

Learn More >>

Double Side Lap and Polish Glass

Flatness

Our ability to achieve extremely flat surfaces on a substrate prior to fabrication enables us to meet precision flatness requirements on the finished window format. As these flatness requirements can take many forms including TIR, TWE, RWE, Waves and Fringes, we can help you determine exactly what specification is needed and design our process accordingly.

Learn More >>

Glass Window Parallelism Standards

Parallelism

Like flatness requirements, through lapping and polishing processes, we can achieve the highest level of parallelism on a substrate from which we can then make the smaller components to sub-micron variation between surfaces virtually eliminating optical distortion through the glass.

Learn More >>

Glass Window Roughness Standards

Roughness

Again, our substrate processing capabilities enable us to start the window fabrication process with the right material to assure your specifications will be met. Our standard substrate polishing process results in a surface roughness under 6A and our Super Polish process can create surfaces to 2A Ra.

Learn More >>

Glass Window Cleaning Capabilities

Cleanliness

If cleanliness is critical to your application, our Ultrasonic Cleaning processes combined with custom, non-contact packaging will result in a residue and particle free window delivered in a clean room ready condition.

Learn More >>

Glass Window Inspection Standards

Inspection

Whether expressed as a Scratch & Dig, Maximum Defect or Light Condition, our experienced inspectors within a Class 100 Optical Clean Room environment and reliably and repeatedly verify our glass window surfaces to the most stringent specifications.

Learn More >>

Glass Wafer Packaging Capabilities

Packaging

Surface quality and cleanliness will largely determine the packaging specification required. For moderate surface quality requirements (40/20 or higher), clean room tissue wrap is often a suitable and cost effective option. For higher quality levels (20/10 or better) and for critical cleanliness, custom vacuum formed trays or other non-contact options may be required. We have developed practical solutions for clean packaging of nearly every glass window format.

Learn More >>